Freza pentru canelat lunga - DIN327 - HSSCo8, 14x26x110 mm

Freza pentru canelat lunga - DIN327 - HSSCo8, 14x26x110 mm

Material : HSSCo8

Unghi spira : 25

Unghi de inclinare : 12

Tip : N

Aschiere dreapta

Recomandat pentru otel (1100 N/mm), inox si fonta.

D (e 8 )  d ( h 6 )  I1  I2  Z
14  12  110  26  2

Conditii de taiere:

Material Strength Ap Ae Vc fz(mm/z)

� 3 � 6 � 8 � 10 � 12 � 16 � 18 � 20 � 25

P.1| Free-cutting steels, general construction steels 600 N/mm  0,5xD  1xD  45  0.009  0.022  0.029  0.036  0.044  0.058  0.065  0.073  0.091
P.2| General construction steels, steel castings 850 N/mm  0,5xD  1xD  39  0.009  0.022  0.029  0.036  0.044  0.058  0.065  0.073  0.091
P.3| Tool steels low alloyed 1100 N/mm 0,5xD  1xD  24  0.009  0.022  0.029  0.036  0.044  0.058  0.065  0.073  0.091
P.4| Heat treatable steels 900 N/mm 0,5xD  1xD  30  0.009  0.022  0.029  0.036  0.044  0.058  0.065  0.073  0.091
P.5| Tool steels high alloyed 1100 N/mm  0,5xD  1xD  24  0.009  0.022  0.029  0.036  0.044  0.058  0.065  0.073  0.091
M.2| Corrosion- and acid-proof steels  750 - 850 N/mm  0,5xD  1xD  15  0.009  0.022  0.029  0.036  0.044  0.058  0.065  0.073  0.091
K.1| Cast iron (240 HB) 820 N/mm  0,5xD  1xD  35  0.009  0.022  0.029  0.036  0.044  0.058  0.065  0.073  0.091
K.2| Cast iron (240 HB)  800 N/mm  0,5xD  1xD  25  0.009  0.022  0.029  0.036  0.044  0.058  0.065  0.073  0.091
N.2 | Al-Si alloys (Si 12%) 600 N/mm  0,5xD  1xD  160-300  0.012  0.029  0.038  0.047  0.057  0.075  0.085  0.095  0.118

Freza pentru canelat LUNGA - DIN327 - HSSCo8